ServiceDiscovery / Client / list_services

list_services¶

ServiceDiscovery.Client.list_services(**kwargs)¶

Lists summary information for all the services that are associated with one or more namespaces.

Request Syntax

response = client.list_services(
    NextToken='string',
    MaxResults=123,
    Filters=[
        {
            'Name': 'NAMESPACE_ID'|'RESOURCE_OWNER',
            'Values': [
                'string',
            ],
            'Condition': 'EQ'|'IN'|'BETWEEN'|'BEGINS_WITH'
        },
    ]
)

Parameters:

NextToken (string) –
For the first ListServices request, omit this value.

If the response contains NextToken, submit another ListServices request to get the next group of results. Specify the value of NextToken from the previous response in the next request.

Note
Cloud Map gets MaxResults services and then filters them based on the specified criteria. It’s possible that no services in the first MaxResults services matched the specified criteria but that subsequent groups of MaxResults services do contain services that match the criteria.
MaxResults (integer) – The maximum number of services that you want Cloud Map to return in the response to a ListServices request. If you don’t specify a value for MaxResults, Cloud Map returns up to 100 services.
Filters (list) –
A complex type that contains specifications for the namespaces that you want to list services for.

If you specify more than one filter, an operation must match all filters to be returned by ListServices.
- (dict) –
  
  A complex type that lets you specify the namespaces that you want to list services for.
  - Name (string) – [REQUIRED]
    
    Specify the services that you want to get using one of the following.
    - NAMESPACE_ID: Gets the services associated with the specified namespace.
    - RESOURCE_OWNER: Gets the services associated with the namespaces created by your Amazon Web Services account or by other accounts. This can be used to filter for services created in a shared namespace. For more information about shared namespaces, see Cross-account Cloud Map namespace sharing in the Cloud Map Developer Guide.
  - Values (list) – [REQUIRED]
    
    The values that are applicable to the value that you specify for Condition to filter the list of services.
    - NAMESPACE_ID: Specify one namespace ID or ARN. Specify the namespace ARN for namespaces that are shared with your Amazon Web Services account.
    - RESOURCE_OWNER: Specify one of SELF or OTHER_ACCOUNTS. SELF can be used to filter services associated with namespaces created by you and OTHER_ACCOUNTS can be used to filter services associated with namespaces that were shared with you.
    - (string) –
  - Condition (string) –
    
    The operator that you want to use to determine whether a service is returned by ListServices. Valid values for Condition include the following:
    - EQ: When you specify EQ, specify one value. EQ is the default condition and can be omitted.

Return type:

dict

Returns:

Response Syntax

{
    'Services': [
        {
            'Id': 'string',
            'Arn': 'string',
            'ResourceOwner': 'string',
            'Name': 'string',
            'Type': 'HTTP'|'DNS_HTTP'|'DNS',
            'Description': 'string',
            'InstanceCount': 123,
            'DnsConfig': {
                'NamespaceId': 'string',
                'RoutingPolicy': 'MULTIVALUE'|'WEIGHTED',
                'DnsRecords': [
                    {
                        'Type': 'SRV'|'A'|'AAAA'|'CNAME',
                        'TTL': 123
                    },
                ]
            },
            'HealthCheckConfig': {
                'Type': 'HTTP'|'HTTPS'|'TCP',
                'ResourcePath': 'string',
                'FailureThreshold': 123
            },
            'HealthCheckCustomConfig': {
                'FailureThreshold': 123
            },
            'CreateDate': datetime(2015, 1, 1),
            'CreatedByAccount': 'string'
        },
    ],
    'NextToken': 'string'
}

Response Structure

(dict) –
- Services (list) –
  
  An array that contains one ServiceSummary object for each service that matches the specified filter criteria.
  - (dict) –
    
    A complex type that contains information about a specified service.
    - Id (string) –
      
      The ID that Cloud Map assigned to the service when you created it.
    - Arn (string) –
      
      The Amazon Resource Name (ARN) that Cloud Map assigns to the service when you create it.
    - ResourceOwner (string) –
      
      The ID of the Amazon Web Services account that created the namespace with which the service is associated. If this isn’t your account ID, it is the ID of the account that shared the namespace with your account. For more information about shared namespaces, see Cross-account Cloud Map namespace sharing in the Cloud Map Developer Guide.
    - Name (string) –
      
      The name of the service.
    - Type (string) –
      
      Describes the systems that can be used to discover the service instances.
      
      DNS_HTTP
      
      The service instances can be discovered using either DNS queries or the DiscoverInstances API operation.
      
      HTTP
      
      The service instances can only be discovered using the DiscoverInstances API operation.
      
      DNS
      
      Reserved.
    - Description (string) –
      
      The description that you specify when you create the service.
    - InstanceCount (integer) –
      
      The number of instances that are currently associated with the service. Instances that were previously associated with the service but that are deleted aren’t included in the count. The count might not reflect pending registrations and deregistrations.
    - DnsConfig (dict) –
      
      Information about the Route 53 DNS records that you want Cloud Map to create when you register an instance.
      - NamespaceId (string) –
        
        Use NamespaceId in Service instead.
        
        The ID of the namespace to use for DNS configuration.
      - RoutingPolicy (string) –
        
        The routing policy that you want to apply to all Route 53 DNS records that Cloud Map creates when you register an instance and specify this service.
        
        Note
        If you want to use this service to register instances that create alias records, specify WEIGHTED for the routing policy.
        
        You can specify the following values:
        
        MULTIVALUE
        
        If you define a health check for the service and the health check is healthy, Route 53 returns the applicable value for up to eight instances.
        
        For example, suppose that the service includes configurations for one A record and a health check. You use the service to register 10 instances. Route 53 responds to DNS queries with IP addresses for up to eight healthy instances. If fewer than eight instances are healthy, Route 53 responds to every DNS query with the IP addresses for all of the healthy instances.
        
        If you don’t define a health check for the service, Route 53 assumes that all instances are healthy and returns the values for up to eight instances.
        
        For more information about the multivalue routing policy, see Multivalue Answer Routing in the Route 53 Developer Guide.
        
        WEIGHTED
        
        Route 53 returns the applicable value from one randomly selected instance from among the instances that you registered using the same service. Currently, all records have the same weight, so you can’t route more or less traffic to any instances.
        
        For example, suppose that the service includes configurations for one A record and a health check. You use the service to register 10 instances. Route 53 responds to DNS queries with the IP address for one randomly selected instance from among the healthy instances. If no instances are healthy, Route 53 responds to DNS queries as if all of the instances were healthy.
        
        If you don’t define a health check for the service, Route 53 assumes that all instances are healthy and returns the applicable value for one randomly selected instance.
        
        For more information about the weighted routing policy, see Weighted Routing in the Route 53 Developer Guide.
      - DnsRecords (list) –
        
        An array that contains one DnsRecord object for each Route 53 DNS record that you want Cloud Map to create when you register an instance.
        
        Warning
        The record type of a service specified in a DnsRecord object can’t be updated. To change a record type, you need to delete the service and recreate it with a new DnsConfig.
        
        (dict) –
        
        A complex type that contains information about the Route 53 DNS records that you want Cloud Map to create when you register an instance.
        
        Type (string) –
        
        The type of the resource, which indicates the type of value that Route 53 returns in response to DNS queries. You can specify values for Type in the following combinations:
        
        A
        
        AAAA
        
        A and AAAA
        
        SRV
        
        CNAME
        
        If you want Cloud Map to create a Route 53 alias record when you register an instance, specify A or AAAA for Type.
        
        You specify other settings, such as the IP address for A and AAAA records, when you register an instance. For more information, see RegisterInstance.
        
        The following values are supported:
        
        A
        
        Route 53 returns the IP address of the resource in IPv4 format, such as 192.0.2.44.
        
        AAAA
        
        Route 53 returns the IP address of the resource in IPv6 format, such as 2001:0db8:85a3:0000:0000:abcd:0001:2345.
        
        CNAME
        
        Route 53 returns the domain name of the resource, such as www.example.com. Note the following:
        
        You specify the domain name that you want to route traffic to when you register an instance. For more information, see Attributes in the topic RegisterInstance.
        
        You must specify WEIGHTED for the value of RoutingPolicy.
        
        You can’t specify both CNAME for Type and settings for HealthCheckConfig. If you do, the request will fail with an InvalidInput error.
        
        SRV
        
        Route 53 returns the value for an SRV record. The value for an SRV record uses the following values:
        
        priority weight port service-hostname
        
        Note the following about the values:
        
        The values of priority and weight are both set to 1 and can’t be changed.
        
        The value of port comes from the value that you specify for the AWS_INSTANCE_PORT attribute when you submit a RegisterInstance request.
        
        The value of service-hostname is a concatenation of the following values:
        
        The value that you specify for InstanceId when you register an instance.
        
        The name of the service.
        
        The name of the namespace.
        
        For example, if the value of InstanceId is test, the name of the service is backend, and the name of the namespace is example.com, the value of service-hostname is the following:
        
        test.backend.example.com
        
        If you specify settings for an SRV record, note the following:
        
        If you specify values for AWS_INSTANCE_IPV4, AWS_INSTANCE_IPV6, or both in the RegisterInstance request, Cloud Map automatically creates A and/or AAAA records that have the same name as the value of service-hostname in the SRV record. You can ignore these records.
        
        If you’re using a system that requires a specific SRV format, such as HAProxy, see the Name element in the documentation about CreateService for information about how to specify the correct name format.
        
        TTL (integer) –
        
        The amount of time, in seconds, that you want DNS resolvers to cache the settings for this record.
        
        Note
        Alias records don’t include a TTL because Route 53 uses the TTL for the Amazon Web Services resource that an alias record routes traffic to. If you include the AWS_ALIAS_DNS_NAME attribute when you submit a RegisterInstance request, the TTL value is ignored. Always specify a TTL for the service; you can use a service to register instances that create either alias or non-alias records.
    - HealthCheckConfig (dict) –
      
      Public DNS and HTTP namespaces only. Settings for an optional health check. If you specify settings for a health check, Cloud Map associates the health check with the records that you specify in DnsConfig.
      - Type (string) –
        
        The type of health check that you want to create, which indicates how Route 53 determines whether an endpoint is healthy.
        
        Warning
        You can’t change the value of Type after you create a health check.
        
        You can create the following types of health checks:
        
        HTTP: Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTP request and waits for an HTTP status code of 200 or greater and less than 400.
        
        HTTPS: Route 53 tries to establish a TCP connection. If successful, Route 53 submits an HTTPS request and waits for an HTTP status code of 200 or greater and less than 400.
        
        Warning
        If you specify HTTPS for the value of Type, the endpoint must support TLS v1.0 or later.
        
        TCP: Route 53 tries to establish a TCP connection. If you specify TCP for Type, don’t specify a value for ResourcePath.
        
        For more information, see How Route 53 Determines Whether an Endpoint Is Healthy in the Route 53 Developer Guide.
      - ResourcePath (string) –
        
        The path that you want Route 53 to request when performing health checks. The path can be any value that your endpoint returns an HTTP status code of a 2xx or 3xx format for when the endpoint is healthy. An example file is /docs/route53-health-check.html. Route 53 automatically adds the DNS name for the service. If you don’t specify a value for ResourcePath, the default value is /.
        
        If you specify TCP for Type, you must not specify a value for ResourcePath.
      - FailureThreshold (integer) –
        
        The number of consecutive health checks that an endpoint must pass or fail for Route 53 to change the current status of the endpoint from unhealthy to healthy or the other way around. For more information, see How Route 53 Determines Whether an Endpoint Is Healthy in the Route 53 Developer Guide.
    - HealthCheckCustomConfig (dict) –
      
      Information about an optional custom health check. A custom health check, which requires that you use a third-party health checker to evaluate the health of your resources, is useful in the following circumstances:
      - You can’t use a health check that’s defined by HealthCheckConfig because the resource isn’t available over the internet. For example, you can use a custom health check when the instance is in an Amazon VPC. (To check the health of resources in a VPC, the health checker must also be in the VPC.)
      - You want to use a third-party health checker regardless of where your resources are located.
      Warning
      If you specify a health check configuration, you can specify either HealthCheckCustomConfig or HealthCheckConfig but not both.
      - FailureThreshold (integer) –
        
        Warning
        This parameter is no longer supported and is always set to 1. Cloud Map waits for approximately 30 seconds after receiving an UpdateInstanceCustomHealthStatus request before changing the status of the service instance.
        
        The number of 30-second intervals that you want Cloud Map to wait after receiving an UpdateInstanceCustomHealthStatus request before it changes the health status of a service instance.
        
        Sending a second or subsequent UpdateInstanceCustomHealthStatus request with the same value before 30 seconds has passed doesn’t accelerate the change. Cloud Map still waits 30 seconds after the first request to make the change.
    - CreateDate (datetime) –
      
      The date and time that the service was created.
    - CreatedByAccount (string) –
      
      The ID of the Amazon Web Services account that created the service. If this isn’t your account ID, it is the account ID of the namespace owner or of another account with which the namespace has been shared. For more information about shared namespaces, see Cross-account Cloud Map namespace sharing in the Cloud Map Developer Guide.
- NextToken (string) –
  
  If the response contains NextToken, submit another ListServices request to get the next group of results. Specify the value of NextToken from the previous response in the next request.
  
  Note
  Cloud Map gets MaxResults services and then filters them based on the specified criteria. It’s possible that no services in the first MaxResults services matched the specified criteria but that subsequent groups of MaxResults services do contain services that match the criteria.

Exceptions

ServiceDiscovery.Client.exceptions.InvalidInput

Examples

Example: List services

response = client.list_services(
)

print(response)

Expected Output:

{
    'Services': [
        {
            'Arn': 'arn:aws:servicediscovery:us-west-2:123456789012:service/srv-p5zdwlg5uvvzjita',
            'CreateDate': 1587081768.334,
            'DnsConfig': {
                'DnsRecords': [
                    {
                        'TTL': 60,
                        'Type': 'A',
                    },
                ],
                'RoutingPolicy': 'MULTIVALUE',
            },
            'Id': 'srv-p5zdwlg5uvvzjita',
            'Name': 'myservice',
        },
    ],
    'ResponseMetadata': {
        '...': '...',
    },
}

list_services¶

Request Syntax

Note

Response Syntax

Response Structure

Note

Warning

Note

Warning

Warning

Warning

Warning

Note

Exceptions

Examples